Victoria vs Nanaimo: the exact asbestos survey → permit → abatement → clearance path for building owners (with checklists)

November 6, 2025

If you’re a building owner or facility manager on Vancouver Island—whether in the healthcare, education or residential sector—you already know one thing for sure: older buildings come with hidden risk. One big risk is Asbestos.
And that is exactly why this step-by-step path matters: because the failings are costly—both financially and legally. This article walks through the full process in British Columbia (specifically on Vancouver Island between Victoria and Nanaimo), explains what you as owner must do (and watch out for), shows where the two markets (Victoria vs Nanaimo) differ in practice, and gives you downloadable checklists you can use. No hype. Just practical detail.

Why it matters

If you own or manage a building built before 1990, the odds are good you have asbestos-containing materials (ACMs) somewhere. As WorkSafeBC points out: “Asbestos was widely used in B.C. as a building material until the early 1990s … it can be present in many areas of older buildings.”

Why is that risky? Because when ACMs are disturbed—during renovation, maintenance, demolition—they release fibres that may cause lung cancer, mesothelioma or asbestosis decades down the line.

It doesn’t only matter for the health of occupants and workers—it matters for you as a building owner: regulatory risk, liability risk, permit delays, project hold-ups. For example: under B.C.’s Occupational Health & Safety Regulation, owners and contractors can’t let abatement work proceed unless the contractor is correctly licensed, certified and you have required documentation.

On Vancouver Island—in places like Victoria and Nanaimo—while the provincial regulation is the same, local context differs: contractor availability, turn-around times for surveys, disposal logistics, municipal building permit practices. I’ll point these out as we go.

The full path, step-by-step

Here’s how the process works—from survey to final clearance—with owner-centric focus. I’ve added two sections for each location (Victoria vs Nanaimo) highlighting local nuances.

Step 1: Pre-works screening / trigger

Before you even apply for a renovation permit (or schedule work) you must ask: is asbestos likely to be present? If the building is pre-1990, your default must be: yes until proven otherwise.

A professional guide puts it simply: “Before you begin renovations or start demolishing … follow these steps to ensure asbestos is safely identified and removed.”

Checklist for you (owner/facility manager):

  • Building age and renovation history documented.
  • Areas of potential ACMs identified (e.g., pipe insulation, ceiling tiles, floor tiles, roofing felts).
  • Budget/allowance for hazardous-materials survey built into project budget.
  • Communication with tenants/users about possible schedule impact.
  • If in a healthcare, school or multi-unit residential property: schedule work for low-occupancy period where possible.
    Victoria nuance: Because Victoria has more older institutional buildings (hospitals, schools) there are more qualified asbestos consultants locally; but high demand means survey slots can fill up 2-3 weeks out.
    Nanaimo nuance: Fewer specialist consultants locally, so you may face travel-fees or longer lead-times; disposal options may involve extra trucking to mainland for some waste streams.

Step 2: Asbestos survey / inventory

Once you trigger that initial decision, the next step is a full asbestos survey (or “hazmat survey” in some tender docs) and creation of an inventory of ACMs.

The regulation in B.C. lays out that a “qualified person” must collect samples, determine whether material is asbestos-containing, and prepare an inventory listing location, description, type, percentage content, etc.

A summary guide defines an asbestos survey as “a thorough inspection to identify asbestos-containing materials (ACMs) in buildings, locating, assessing and documenting them.”

Checklist for you:

  • Confirm the surveyor is a qualified person (e.g., certified industrial hygienist (CIH), registered occupational hygienist) and their credentials.
  • Define scope in tender: management survey vs refurbishment/demolition survey (the latter is more intrusive).
  • Ensure sampling plan is included (representative samples, accessible hidden spaces).
  • Inventory report delivered including: map/plan showing ACM locations; material descriptions; condition assessments (good/fair/poor); recommended next steps.
  • Save the report in your building files and share with maintenance/service teams.
    Victoria nuance: Because there are more large-scale institutional projects, many consultants in Victoria will already provide digital inventory platforms or building-wide ACM databases—so you may benefit from a system you can update over time.
    Nanaimo nuance: With smaller portfolios, sometimes the report may be “flat pdf” only; you’ll want to ask about long-term asset-tracker capability if you manage multiple sites.
    Quote from industry: According to a B.C. consultant quoted in a regulatory summary: “The dangers of asbestos and health-related effects of exposure are well known … I’m hopeful that the new licensing and certification requirements will help decrease the likelihood of this happening.”

Step 3: Risk assessment + permit planning

Once you have the inventory, you (or your project team) must integrate the findings into your planning: decide which ACMs will remain undisturbed (managed in place) vs which must be removed/encapsulated, align with your renovation permit, and figure in local municipal requirements.
Regulations require that if ACMs are going to be disturbed, an exposure-control plan is developed, and you’ll need to ensure your contractors are certified/licensed.

Checklist for you:

  • Identify which materials in the scope of work are ACMs and may be disturbed.
  • Define abatement scope (removal vs encapsulation vs leaving in place).
  • Include abatement scope in building permit submission (if required by municipality).
  • Confirm contractor is listed in the Asbestos Abatement Licence Registry.
  • Budget contingency for disposal/trucking of asbestos waste (especially from remote sites).
  • Communicate schedule impacts: abatement work may push out renovation start.
    Victoria nuance: Municipalities (City of Victoria, Saanich, etc.) may require asbestos clearance documentation before inspections proceed — so schedule abatement early in your permit timeline.
    Nanaimo nuance: Disposal sites and transport for asbestos waste may require booking; check Haulage/trucking permission in Nanaimo region.
    Pain-point for owners: “Permit applied, renovation contractor won’t mobilize until clearance letter” — avoidable if you schedule abatement and clearance ahead.

Step 4: Abatement & removal

This is the execution phase: the licensed abatement contractor mobilizes, implements the containment, removal, waste packaging, transport and disposal of ACMs. In B.C., as of January 1 2024, any employer carrying out asbestos abatement must be licensed and the workers certified.

Remember, the building owner still retains oversight responsibility.

Checklist for you:

  • Confirm contractor’s licence, and that key staff hold valid asbestos-certification.
  • Review contractor’s site-specific safety plan, including exposure control plan, decontamination area, negative-air machines, HEPA vacuums.
  • Ensure pre-work communication with occupants: signage, access restrictions, stop-work orders if unexpected ACMs are found.
  • Monitor waste manifest/tracking: proper labelling, secure storage, approved disposal site.
  • If required, daily air-monitoring and audible indicator of negative pressure (depending on risk classification). Refer to your survey report risk-level classification.
    Victoria nuance: Because there are many large projects, some abatement firms in Victoria run multiple shifts; scheduling during off-hours (nights/weekends) may save disruption in busy facilities (hospitals/schools).
    Nanaimo nuance: Given smaller local market, ensure the contractor has local disposal logistics worked out and confirm turnaround times.
    Tip: If contractor finds unexpected ACM (not in the survey) stop work immediately, reassess scope and adjust contract.

Step 5: Clearance & documentation

After removal is complete, you must obtain clearance documentation before the area is reoccupied, inspected, or building permit inspection proceeds. The clearance process involves visual inspection, air clearance sampling if required, and issuance of a report. The regulation for BC states: “Only qualified professionals can safely remove asbestos … and a qualified person must … confirm in writing that the asbestos has been safely removed."

Checklist for you:

  • Receive final abatement contractor report: includes dates, scope, waste manifests, photos, NOP-H number (if used).
  • If air-clearance required (high risk job) receive third-party consultant clearance certificate.
  • Ensure copies filed in building records; provide to municipality/building inspector as required.
  • Update your asbestos inventory: mark removed ACMs, update location status, refresh condition assessment if remaining ACMs present.
  • Post-occupancy monitoring plan: if ACMs remain, schedule re-inspection or condition reassessment (typically annually or when disturbed).
    Victoria nuance: Large owners (e.g., hospital authorities) often integrate clearance documents into CMMS (computer maintenance systems) for tracking. You might ask about integrating with your facility management software.
    Nanaimo nuance: You may not yet have a CMMS; consider setting up a simple spreadsheet or database to track ACMs, abatement history and clearance docs.
    Pitfall: Re-occupying before final clearance can void warranties, trigger inspector stop-work orders, or trigger liability issues.

Victoria vs Nanaimo – comparative considerations

FactorVictoria regionNanaimo region
Consultant/contractor availabilityLarger vendor pool. Faster scheduling, more competition.Smaller pool. Might mean longer lead-time or out-of-town contractor.
Disposal logisticsCloser to major disposal sites; good regional transport links.May require longer haul, additional costs for movement of asbestos waste.
Project scale & complexityMore institutional buildings (hospitals, large schools) → more experience in high-risk abatement.More small/medium-scale facilities; less experience with very large abatement scope.
Municipal / inspector expectationsInspectors familiar with complex abatement documentation; may expect digital tracking systems.Inspectors may be more conservative; may expect the basics—ensure you have clearance docs ready for building permit inspections.
Odds of hidden ACMsHigher, simply because older inventory is larger and renovations have been done multiple times.Slightly lower risk density, but still significant. Smaller projects can still turn up surprises.

Document checklists you should keep

Below are two core checklists you should maintain for each project.
Checklist A – Before survey:

  • Building record (construction date, renovation history).
  • Scope of work defined (what areas will be disturbed).
  • Appointment of qualified surveyor; credentials verified.
  • Budget earmarked for survey and possible abatement.
  • Contract with surveyor includes sample numbers and inventory deliverable.
  • Schedule communicated to occupants/tenants.
  • Permit application timeline aligned with survey deliverable.

Checklist B – Before re-occupancy:

  • Abatement contractor licence & worker certifications verified.
  • Exposure control plan on file; site-specific safety plan available.
  • Work-site documentation (waste manifests, negative-air logs, containment photos).
  • Final abatement report delivered.
  • Third-party clearance report (if required) delivered.
  • Updated asbestos inventory (removed items flagged; remaining items status recorded).
  • Documentation filed in building records and ready for inspector review.
  • Schedule for ongoing monitoring of ACMs identified as “in place”.

You can adapt these checklists into your own facility management system (paper files, CMMS, cloud folder) and refer back whenever a renovation or maintenance job is about to disturb materials.

Key regulatory changes you need to know

  • As of January 1, 2024, in British Columbia any employer offering asbestos abatement services (including surveys, removal, transport) must be licensed by WorkSafeBC, and workers must be certified.
  • Building owners and prime contractors must ensure that licensed contractors are used and that documentation of certification is in place.
  • Waste asbestos is regulated as hazardous waste if it contains more than 1 % asbestos fibres (by weight) and is friable or becomes friable.
  • From the B.C. regulation: the owner and employer must ensure a qualified person collects samples, determines whether material is ACM, and prepares an inventory including location, description, type and percentage.
    Failure to stay up to date with these rules exposes you to permit delays, contractor un-licensing, insurance/ liability risk and potential stop-work orders.

Typical timelines and cost-drivers (on Vancouver Island)

  • Survey lead time: In Victoria region expect 1–3 weeks for consultant scheduling; in Nanaimo 2–4 weeks or more.
  • Lab results: Bulk sample analysis often 5–10 business days.
  • Abatement mobilisation: Depending on scale, between 1–4 weeks after contractor selected; remote disposal may add time.
  • Clearance & re-occupancy: After abatement complete, expect 2–7 days to receive final report depending on complexity.
    Cost-drivers:
  • Volume of ACMs (square metres, linear metres pipe insulation)
  • Friability / condition of ACMs (poor condition = higher risk = higher cost)
  • Access constraints (occupied facility, off-hours work)
  • Disposal and transport (remote site = higher cost)
  • Requirement for air-clearance and monitoring (higher risk classification)

Because of these variables, building owners should budget contingency (typically 15-25 %) for abatement scope growth once hidden materials are discovered.

Final words for facility managers

If you’re a building owner or facility manager in Victoria or Nanaimo, here’s what I recommend:

  1. Treat asbestos-risk as a project risk, not a hidden unknown. The survey → permit → abatement → clearance path must be part of your pre-project planning.
  2. Don’t assume “nothing to do” because the building wasn’t built in the 70s or 80s. Even older minor renovations or installations may have disturbed ACMs.
  3. Use the checklists above and keep your documentation in one folder (digital + paper). When you hand-over the job or change contractors, the record stays with the facility.
  4. For Vancouver Island, factor in local logistics: longer lead times, fewer specialists, disposal transport. That means earlier planning equals lower delays.
  5. Ask contractors and consultants before selection: show me your licence/certification; show me your inventory and clearance process; show me your disposal manifest process. If they hesitate, that’s a red flag.
  6. Remember: leaving ACMs in place can be acceptable—but only when they are intact, undisturbed, and recorded in your inventory. If you’re about to renovate or upgrade systems, chances are removal is the safer path.
  7. Finally: keep the voice skeptical. “It looks okay, they said no ACM” isn’t enough. Challenge assumptions. Market your facility as being compliant, safe and well-documented. That protection serves you now—and protects you from future liability.

Got Questions?

We understand the stress, and confusion that dealing with hazardous materials brings. We're here to help. Got questions? Concerns? or just need to vent (pun intentional) - give us a shout!
Get in Touch

More About What We Do

Member Profile
Member Profile
Certified Asbestos Inspectors
Healthcare Construction
Certificate of Recognition
Better Business Bureau
BC Environment Ind. Association
Power System Safety Protection
AHERA® Certified
We maintain a respectful workplace environment. Ethical, Experienced, & Insured
Canadian HAZ-MAT Environmental Ltd.
Located at 3388 Douglas St. Victoria, BC V8Z 3L3 - All mail to 1111 Tulip Ave, Victoria, BC V8Z-7Z2Site Designed, Developed, & Promoted by MullerConsulting
menuchevron-down